DUDEK-GEAR PUMP泵I/a-Sph工作參數
使用過程包括安裝、調試和正常運行。在安裝過程中，需確保泵頭與系統的法蘭連接緊密，避免泄漏。調試時，需檢查泵的轉向是否正確，以及各部件是否運行平穩。正常運行時，需定期監測泵的壓力、溫度和流量等參數，確保泵在最佳狀態下工作。
type： I/a-Sph
Fluid ................................................ : heat transfer oil
Characteristic of fluid ...................... : not corrosiv, not abrasiv, no solids
Spare pump for serial no. ............... : D/51040
Working temperature (WT) ............. : max. 250 °C
Density ( at WT.) ............................. : ~ 0,9 kg/l
Ambient temperature ...................... : 0 - 30 °C
Viscosity ( at WT.) .......................... : < 75 mPas
Capacity .......................................... : 2,5 m3/h
Suction pressure absolut ................ : ~ 1 bara
Discharge pressure absolut ............ : max. 13 bara
Differential pressure Δp .................. : max. 12 bar with cold oil
Working data of quoted pump
Operation ........................................ : filling and draining pump for heat transfer oil system
Capacity .......................................... : 2,5 m3/h
Nominal speed ................................ : 1.450 rpm
Nominal required power ................. : - kW
Motor power recommended............ : - Kw
Design and material
Pump housing ................................. : ductile iron GGG 40 (EN-GJS-400-15)
Gears .............................................. : steel C45 nitrated
Shafts .............................................. : steel 42CrMo4V nitrated
Bearing bushes ............................... : CuZn40Al2
Inlet / suction flange ........................ : DN 32 PN 16
Outlet / discharge flange ................. : DN 32 PN 16
Pump drain tray ............................. : inclusive
Direction of turning ......................... : anticlockwise standard, or clockwise if required
Shaft sealing
Type ................................................ : single internal mechanical seal, independent of direction of rotation
Brand / maker ................................. : BURGMANN
Description / design ........................ : MFL for hot oil application
Complete pump unit with INNOMOTICS SIEMENS motor 2,2 kW
Price for 1 pump unit with base plate, coupling, motor, painting
HYDAC濾芯N15DM002 (1251590)
HYDAC密封維修套件306028 MDF..160 FG 1.0/1.3
HYDAC密封維修套件1260990 DF....60 G 1.0
HYDAC密封維修套件302094 DF....60 G 1.0 /-V
HYDAC密封維修套件319613 RF...330 D G/D L 1.0
HYDAC密封維修套件1202364 RF...330/500 HC
RECHNER傳感器IA0248 IAS-10-A22-S-M12-PBT/MS-Z03-0
AVIORACE傳感器DIA13-150
ELAP位移傳感器PM2S-50-5K-M12
EUCHNER光柵LCA-4TR-3B-810-AP-156588
EUCHNER激光對準設備AY-OS-LSR-156915
RSG電磁閥92141068 214A5800/6,0/M0G14F 2400
Mannesmann Demag氣動馬達MRD 25-1040 F55 Artikel-Nr.: 60003917
BUHLER電機1.61.065.466.05, DC24V i=241,6, 20Ncm
HYDAC流量傳感器909810 EVS 3106-A-0060-000
HYDAC流量傳感器909812 EVS 3106-A-0300-000
HYDAC備用氣囊4783626 BLASE_100L_M50/M28x1,5_NBR/SS_KOMPL*
HYDAC泵4049626 PPV100S145-FR07K1E2D-10-4205
HYDAC壓力傳感器925749 HDA 4746-CC-0040-0040-PD-031(-1..+40BAR)
Framo-Morat零件S31U10
Framo-Morat零件R31U10B
DUDEK-GEAR PUMP泵I/a-Sph,serial no: D/51040
DUDEK-GEAR PUMP泵II/a-Sph,serial no: D/50749
HYDAC閥4194173 4WE 6 D A01-205DG/V